Wolo Air Horns Parts
!

Wolo Model-400-C Replacement Air Horn Compressor
!
wolo 400-c
  • Wolo Replacement Air Horns Compressor
  • 10-12 psi
  • 12 VDC Operation

  • The Model 400-C is same compressor that is packaged with Wolo Air Horns: 400, 402,403, 405, 415, 417, 418, Xtreme Air series, 808, 809, 836, and 845

Wolo Model-PS-1 High Pressure Switch
!
wolo ps-1
  • The Model PS-1 pressure switch is specifically designed for Wolo’s high-pressure on-board air systems, Models 800 an 840 and is compatible for wide variety of other manufactures on-board air systems
  • The PS-1 switch is factory preset to turn on the compressor when tank pressure is below 80 psi. and turn off the compressor when the tank pressure is 110 psi., with a tolerance of ± 10% (pressure turn on/off pressure range is not adjustable)
  • Rated to operate reliably up to 25 amps an is built to be compact in size, connects with standard ¼” push-on terminals.
  • Size: D 1 inch x H 1 3/4 inch
  • 1/4 inch pipe threads
  • Rated load 12-volt DC 3.5 amp
  • 1/4 inch push-on male terminals

Wolo Model-812-EV Electric Solenoid Tank Valve
!
wolo 812-ev
  • Wolo Electric Solenoid Tank Valve
  • Used with Wolo’s Challenger series and air powered horns that require an on board air system for 12 volt vehicles.
  • When the vehicle's horn button is depressed, the Model 812-EV becomes electrically energized, opening the solenoid and permitting air to enter the horn from the tank.
  • The solenoid remains engaged as long as the horn button is depressed.
  • The valve easily threads into the tank and is connect to the air horn by using a 1/4" air hose (not included).
  • The valve comes with a brass fitting.

    Specifications
  • Hose fittings: 1/4"
  • Size: L 4 1/4" x W 1 3/8" x H 2 1/8"
  • Voltage: 12 Volts
  • Solenoid current: 300 mA

Wolo Model-804-EV Electric Solenoid Valve
!
wolo 804-ev
  • Wolo Electric Solenoid Valve
  • Used with air powered horns that require an on board air system for 12 volt vehicles.
  • When the vehicle's horn button is depressed, the Model 804-EV becomes electrically energized, opening the solenoid and permitting air to reach the horns.
  • The solenoid remains engaged as long as the horn button is depressed.
  • The valve easily threads into the tank and is connect to the air horn by using a 1/4" air hose (not included).
  • The valve comes with a brass fitting.

    Specifications
  • Hose fittings: 1/4"
  • Size: L 3 1/4" x W 1" x H 1-3/4"
  • Voltage: 12 Volts
  • Solenoid current: 300 mA

Wolo Model-800C Tiger Replacement Compressor
!
wolo 800c
  • The Model 800-C is sold as a replacement compressor for ¼" high pressure tank systems.
  • The compressor's motor is carefully balanced and then mounted on heavy rubber bushing's, virtually eliminating all vibration.
  • Air hose fittings are made quality brass to insure leak free installations.
  • For use with a standard 1/4 hose.
  • Compressor size: L 6-1/8" x W 3-1/2" x H 5-1/8"
  • Voltage: 12 Volts
  • Current: 10 Amperes
  • Compressor auto-off: 105 psi
  • Compressor auto-on: 85 psi