XpressKit Accessories
Bookmark and Share

 

!

Xpresskit XKLOADER2 Programming Tool

!
XKLOADER2 is the 2nd generation USB computer interface (Bootloader) that acts as a bridge between your pc & an upgradeable vehicle interface module. A program called VIP (Vehicle Interface Program) provides the user interface needed to update and/or change the vehicle firmware. VIP includes a critical update alert which informs you when newer version of vehicle firmware is available. XKLOADER2 is faster, more powerful and more secure to keep pace with the latest technologies such as CANMAX400, 3901V, 3902V, 3903V and all XpressKit programmable products
  • More powerful encryption scheme, faster download speed and higher current output
  • Direct Plug and play compatible with the new CANMAX400 and CANMAX400DEI Series
  • Plug & play with Windows Vista 32 & 64, XP and Windows 2000 O/S
  • Upgrade any Xpresskit anytime from anywhere (internet access is required)
  • Auto detects installed firmware and alerts user of any critical updates
  • Flash and re-flash any available firmware

Xpresskit PKDOCK Dock for all RFLOOPS

!
EAN: 0093207074431
  • Directed Electronics PKDOCK Dock for RF Loops to Operate as PK

XpressKit TBXKEY Universal Bypass Kit

!

TBXKEY Programming

  • Universal transponder bypass with Xpressport and D2D ready
  • The world's first D2D capable universal RF transponder bypass solution. TBXKEY features Xpressport and D2D technology as well as advance features that allow installer to select the optimum RFID pick up sensitivity and modify the method used to transmit to the factory transceiver.
  • TBXKEY has selectable windings to tune it to the same frequency as the factory immobilizer from detecting multiple transponder keys at the same time.
  • Compatible with all XKEYS, the TBXKEY is a revolution in universal bypass technology.
  • * D2D mode requires XKEY
  • 1 Key kequired to operate the kit
  • Compatible with any remote starter
  • Compact design easy to mount
  • As few as 2-wire installation compatible with manufacturer's anti-theft system
  • Maintain integrity of factory vehicle anti-theft system
  • 1 Key required to operate
  • No programming required
  • High quality rubber stretch fit antenna loop
  • New selectable jumper position for easy RF transponder sensitivity tuning
  • alternative installation option including +/- keysense shut down circuit
  • Mercedes transponder isolation circuit
  • Xpressport
  • D2D ready (only when using Xkey with the Xpressport)

XpressKit XKEYUB Universal Transponder Key Bypass

!
  • Universal XKEY pod with RF loop and 2 part resin that can be used with any pre-programmed transponder pellet
  • *Just add your pre-programmed transponder pellet into the XKEYUB
  • Can be Docked into CANMAX400 and CANMAX400DEI
  • *Transponder not included

XpressKit 556UW Universal Remote Start Interface

!
EAN: 093207005756

Installation Manual Here

 

The 556UW start interface module is used when installing remote start products in vehicles equipped with a transponder or RF (Radio Frequency) based immobilizer system. This type of system uses a small chip imbedded in the ignition key, called a transponder, to transmit a very low powered RF signal. This signal is picked up through an antenna (or coil) around the ignition switch which is then sent to the immobilizer’s transceiver. Once the correct signal is received, the immobilizer will enable the ignition and/or fuel systems. If an attempt is made to start the vehicle and the transceiver does not receive a valid code, the ignition and sometimes the fuel systems are disabled. The immobilizer system will then render the remote start useless. The 556UW bypasses the immobilizer system only while the remote start is in use, maintaining the factory system’s integrity. When the remote start system is not in use the factory immobilizer remains fully functional.

  • Universal RF Transponder bypass with RF loop
  • Working ignition key required for operation
  • Selectable key winding for precision RF Tuning