Precision Power Amplifiers
Bookmark and Share

 

!

Precision Power PC1000.1 Mono Amplifier

!
  • Class D Mono Amplifier
  • 1000W x 1 @ 2 Ohm RMS
  • 1000W x 1 @ 1 Ohm RMS
  • Damping Factor: >2400
  • Stereo Separation: 68dB
  • Channels 1 LPF: 50-200Hz

  • Bass Boost (30-90Hz): 0-12dB
  • Subsonic Filter: 15Hz-50Hz
  • Phase Control: 0-180
  • Remote Gain Control Included
  • Dimensions: 2" H x 10" W x 16" L
  • Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops
  • Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and Noise
  • Full Signal Path Low Noise/Distortion Circuitry Topology
  • Optimal Component Layout for Minimal Distortion Induction & Signal Separation
  • Triple Darlington Audio Output Stages
  • Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
  • Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Terminals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
  • Output Stage Bias Individually Sequenced, Optimizing Sound Quality
  • Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
  • Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
  • Parametric Bass Equalizer - Proprietary Bass Equalization
  • Continuously Variable 41 Position Detent Crossovers
  • Balanced Line Input from BLT
  • Variable Subwoofer Pre-Amp Output w/ LPF (80, 120,)
  • Pulse Width Modulated
  • Large TO218 MOSFET Transistors
  • High Volume, Low ESR Capacitance Banks Compensate Power Supply Ripple Currents
  • Extra Low Current Drive Stage Increases Efficiency & Sound Clarity
  • Individually Regulated Preamp/Crossover Power Supplies Ensure Signal Purity

Precision Power PC360.2 2 Channel Amplifier

!
  • 2 Channel Class A/B Amplifier
  • 110W x 2 @ 4 Ohm RMS
  • 180W x 2 @ 2 Ohm RMS
  • 360W x 1 @ 4 Ohm Bridged RMS
  • Remote Gain Control Included
  • Damping Factor: >3000
  • Stereo Separation: 62dB
  • Channels 1&2 HPF: 15-4kHz

  • Channels 1&2 LPF: 50-4kHz

  • Bass Boost (30-90Hz): 0-12dB
  • Subsonic Filter: 15Hz-4Khz
  • Dimensions: 2" H x 10" W x 11" L
  • Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops
  • Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and Noise
  • Full Signal Path Low Noise/Distortion Circuitry Topology
  • Optimal Component Layout for Minimal Distortion Induction & Signal Separation
  • Triple Darlington Audio Output Stages
  • Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
  • Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Terminals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
  • Output Stage Bias Individually Sequenced, Optimizing Sound Quality
  • Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
  • Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
  • Parametric Bass Equalizer - Proprietary Bass Equalization
  • Continuously Variable 41 Position Detent Crossovers
  • Balanced Line Input from BLT
  • Variable Subwoofer Pre-Amp Output w/ LPF (80, 120,

Precision Power PC650.2 2 Channel Amplifier

!
  • 2 Channel Class A/B Amplifier
  • 195W x 2 @ 4 Ohm RMS
  • 325W x 2 @ 2 Ohm RMS
  • 650W x 1 @ 4 Ohm Bridged RMS
  • Remote Gain Control Included
  • Damping Factor: >1500
  • Stereo Separation: 73dB
  • Channels 1&2 HPF: 15-4kHz

  • Channels 1&2 LPF: 50-4kHz

  • Bass Boost (30-90Hz): 0-12dB
  • Subsonic Filter: 15Hz-4Khz
  • Dimensions: 2" H x 10" W x 15" L
  • Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops
  • Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and Noise
  • Full Signal Path Low Noise/Distortion Circuitry Topology
  • Optimal Component Layout for Minimal Distortion Induction & Signal Separation
  • Triple Darlington Audio Output Stages
  • Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
  • Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Terminals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
  • Output Stage Bias Individually Sequenced, Optimizing Sound Quality
  • Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
  • Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
  • Parametric Bass Equalizer - Proprietary Bass Equalization
  • Continuously Variable 41 Position Detent Crossovers
  • Balanced Line Input from BLT
  • Variable Subwoofer Pre-Amp Output w/ LPF (80, 120,)
  • Pulse Width Modulated
  • Large TO218 MOSFET Transistors
  • High Volume, Low ESR Capacitance Banks Compensate Power Supply Ripple Currents
  • Extra Low Current Drive Stage Increases Efficiency & Sound Clarity
  • Individually Regulated Preamp/Crossover Power Supplies Ensure Signal Purity

Precision Power PC400.4 4 Channel Amplifier

!
  • 4 Channel Class A/B Amplifier
  • 70W x 4 @ 4 Ohm RMS
  • 100W x 4 @ 2 Ohm RMS
  • 200W x 2 @ 4 Ohm Bridged RMS
  • Damping Factor: >2000
  • Stereo Separation: 74dB
  • Channels 1&2 HPF: 15-4kHz

  • Channels 3&4 LPF: 50-4kHz

  • Bass Boost (30-90Hz): 0-12dB
  • Subsonic Filter: 15Hz-4Khz
  • Dimensions: 2" H x 10" W x 12.5" L
  • Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops
  • Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and Noise
  • Full Signal Path Low Noise/Distortion Circuitry Topology
  • Optimal Component Layout for Minimal Distortion Induction & Signal Separation
  • Triple Darlington Audio Output Stages
  • Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
  • Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Terminals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
  • Output Stage Bias Individually Sequenced, Optimizing Sound Quality
  • Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
  • Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
  • Parametric Bass Equalizer - Proprietary Bass Equalization
  • Continuously Variable 41 Position Detent Crossovers
  • Balanced Line Input from BLT
  • Variable Subwoofer Pre-Amp Output w/ LPF (80, 120,)
  • Pulse Width Modulated
  • Large TO218 MOSFET Transistors
  • High Volume, Low ESR Capacitance Banks Compensate Power Supply Ripple Currents
  • Extra Low Current Drive Stage Increases Efficiency & Sound Clarity
  • Individually Regulated Preamp/Crossover Power Supplies Ensure Signal Purity

Precision Power PC640.4 4 Channel Amplifier

!
  • 4 Channel Class A/B Amplifier
  • 115W x 4 @ 4 Ohm RMS
  • 160W x 4 @ 2 Ohm RMS
  • 320W x 2 @ 4 Ohm Bridged RMS
  • Damping Factor: >3000
  • Stereo Separation: 68dB
  • Channels 1&2 HPF: 15-4kHz

  • Channels 3&4 LPF: 50-4kHz

  • Bass Boost (30-90Hz): 0-12dB
  • Subsonic Filter: 15Hz-4Khz
  • Dimensions: 2" H x 10" W x 16.75" L
  • Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops
  • Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and Noise
  • Full Signal Path Low Noise/Distortion Circuitry Topology
  • Optimal Component Layout for Minimal Distortion Induction & Signal Separation
  • Triple Darlington Audio Output Stages
  • Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
  • Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Terminals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
  • Output Stage Bias Individually Sequenced, Optimizing Sound Quality
  • Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
  • Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
  • Parametric Bass Equalizer - Proprietary Bass Equalization
  • Continuously Variable 41 Position Detent Crossovers
  • Balanced Line Input from BLT
  • Variable Subwoofer Pre-Amp Output w/ LPF (80, 120,)
  • Pulse Width Modulated
  • Large TO218 MOSFET Transistors
  • High Volume, Low ESR Capacitance Banks Compensate Power Supply Ripple Currents
  • Extra Low Current Drive Stage Increases Efficiency & Sound Clarity
  • Individually Regulated Preamp/Crossover Power Supplies Ensure Signal Purity

Precision Power PC740.5 5 Channel Amplifier

!
  • 5 Channel Class A/B Amplifier
  • 60W x 4 + 250W x 1 @ 4 Ohm RMS
  • 90W x 4 + 380 x 1 @ 2 Ohm RMS
  • 180W x 2 @ 4 Ohm Bridged RMS
  • Damping Factor: >3000
  • Stereo Separation: 68dB
  • Channels 1&2 HPF: 15-4kHz

  • Channels 3&4 LPF: 50-4kHz

  • Bass Boost (30-90Hz): 0-12dB
  • Subsonic Filter: 15Hz-4Khz
  • Phase Control: 0-180
  • Remote Gain Control Included
  • Dimensions: 2" H x 10" W x 16.75" L
  • Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops
  • Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and Noise
  • Full Signal Path Low Noise/Distortion Circuitry Topology
  • Optimal Component Layout for Minimal Distortion Induction & Signal Separation
  • Triple Darlington Audio Output Stages
  • Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
  • Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Terminals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
  • Output Stage Bias Individually Sequenced, Optimizing Sound Quality
  • Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
  • Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
  • Parametric Bass Equalizer - Proprietary Bass Equalization
  • Continuously Variable 41 Position Detent Crossovers
  • Balanced Line Input from BLT
  • Variable Subwoofer Pre-Amp Output w/ LPF (80, 120,)
  • Pulse Width Modulated
  • Large TO218 MOSFET Transistors
  • High Volume, Low ESR Capacitance Banks Compensate Power Supply Ripple Currents
  • Extra Low Current Drive Stage Increases Efficiency & Sound Clarity
  • Individually Regulated Preamp/Crossover Power Supplies Ensure Signal Purity

Precision Power S270.1 Mono Amplifier

!
  • Sedona Class B/D Mono Amplifier
  • 170W x 1 @ 4 Ohm RMS
  • 270W x 1 @ 2 Ohm RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 13" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input

Precision Power S550.1D Mono Amplifier

!
  • Sedona Class D Mono Amplifier
  • 550W x 1 @ 1 Ohm RMS
  • 400W x 1 @ 2 Ohm RMS
  • 240W x 1 @ 4 Ohm RMS
  • Variable Low Crossovers: 40Hz - 220Hz
  • Variable Subsonic Crossovers: 10Hz - 50Hz 

  • Variable Bass Boost: 0/6/12dB
  • Input Sensitivity: 200mV - 5V
  • THD: <0.5%
  • Damping Factor: >200
  • Sensitivity: >85dB
  • Power Fuse: 60 Amp
  • Remote Gain Control Included
  • Dimensions: 2.32" H x 9.45" W x 12.01" L
  • Brushed Aluminum Finish
  • Double Sided PCB and SMD Components
  • Full MOSFET Design
  • LPF and Subsonic Crossovers
  • Adjustable Bass Boost Level
  • Active Crossover Function
  • Heavy Duty Aluminum Alloy Heat Sink
  • High (Speaker) or Low (RCA) Level Inputs
  • Overload, Overheat, High/Low/ Voltage Protection
  • ROHS Compliant

Precision Power S850.1D Mono Amplifier

!
  • Sedona Class D Mono Amplifier
  • 850W x 1 @ 1 Ohm RMS
  • 600W x 1 @ 2 Ohm RMS
  • 350W x 1 @ 4 Ohm RMS
  • Variable Low Crossovers: 40Hz - 220Hz
  • Variable Subsonic Crossovers: 10Hz - 50Hz 

  • Variable Bass Boost: 0/6/12dB
  • Input Sensitivity: 200mV - 5V
  • THD: <0.5%
  • Damping Factor: >200
  • Sensitivity: >85dB
  • Power Fuse: 80 Amp
  • Remote Gain Control Included
  • Dimensions: 2.32" H x 9.45" W x 13.58" L
  • Brushed Aluminum Finish
  • Double Sided PCB and SMD Components
  • Full MOSFET Design
  • LPF and Subsonic Crossovers
  • Adjustable Bass Boost Level
  • Active Crossover Function
  • Heavy Duty Aluminum Alloy Heat Sink
  • High (Speaker) or Low (RCA) Level Inputs
  • Overload, Overheat, High/Low/ Voltage Protection
  • ROHS Compliant

Precision Power S1300.1D Mono Amplifier

!
  • Sedona Class D Mono Amplifier
  • 850W x 1 @ 1 Ohm RMS
  • 600W x 1 @ 2 Ohm RMS
  • 350W x 1 @ 4 Ohm RMS
  • Variable Low Crossovers: 40Hz - 220Hz
  • Variable Subsonic Crossovers: 10Hz - 50Hz 

  • Variable Bass Boost: 0/6/12dB
  • Input Sensitivity: 200mV - 5V
  • THD: <0.5%
  • Damping Factor: >200
  • Sensitivity: >85dB
  • Power Fuse: 120 Amp
  • Remote Gain Control Included
  • Dimensions: 2.32" H x 9.45" W x 16.34" L
  • Brushed Aluminum Finish
  • Double Sided PCB and SMD Components
  • Full MOSFET Design
  • LPF and Subsonic Crossovers
  • Adjustable Bass Boost Level
  • Active Crossover Function
  • Heavy Duty Aluminum Alloy Heat Sink
  • High (Speaker) or Low (RCA) Level Inputs
  • Overload, Overheat, High/Low/ Voltage Protection
  • ROHS Compliant

Precision Power S2000.1D Mono Amplifier

!
  • Sedona Class D Mono Amplifier
  • 2000W x 1 @ 1 Ohm RMS
  • 1300W x 1 @ 2 Ohm RMS
  • 750W x 1 @ 4 Ohm RMS
  • Variable Low Crossovers: 40Hz - 220Hz
  • Variable Subsonic Crossovers: 10Hz - 50Hz 

  • Variable Bass Boost: 0/6/12dB
  • Input Sensitivity: 200mV - 5V
  • THD: <0.5%
  • Damping Factor: >200
  • Sensitivity: >85dB
  • Power Fuse: 200 Amp
  • Remote Gain Control Included
  • Dimensions: 2.32" H x 9.45" W x 19.09" L
  • Brushed Aluminum Finish
  • Double Sided PCB and SMD Components
  • Full MOSFET Design
  • LPF and Subsonic Crossovers
  • Adjustable Bass Boost Level
  • Active Crossover Function
  • Heavy Duty Aluminum Alloy Heat Sink
  • High (Speaker) or Low (RCA) Level Inputs
  • Overload, Overheat, High/Low/ Voltage Protection
  • ROHS Compliant

Precision Power S200.2 2 Channel Amplifier

!
  • Sedona 2 Channel Class A/B Amplifier
  • 70W x 2 @ 4 Ohm RMS
  • 100W x 2 @ 2 Ohm RMS
  • 200W x 1 @ 4 Ohm Bridged RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 13" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input

Precision Power S420.2 2 Channel Amplifier

!
  • Sedona 2 Channel Class A/B Amplifier
  • 130W x 2 @ 4 Ohm RMS
  • 210W x 2 @ 2 Ohm RMS
  • 420W x 1 @ 4 Ohm Bridged RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 19" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input

Precision Power S580.2 2 Channel Amplifier

!
  • Sedona 2 Channel Class A/B Amplifier
  • 190W x 2 @ 4 Ohm RMS
  • 290W x 2 @ 2 Ohm RMS
  • 580W x 1 @ 4 Ohm Bridged RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 23" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input

Precision Power S320.4 4 Channel Amplifier

!
  • Sedona 4 Channel Class A/B Amplifier
  • 55W x 4 @ 4 Ohm RMS
  • 80W x 4 @ 2 Ohm RMS
  • 160W x 2 @ 4 Ohm Bridged RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 17" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input

Precision Power S580.4 4 Channel Amplifier

!
  • Sedona 4 Channel Class A/B Amplifier
  • 100W x 4 @ 4 Ohm RMS
  • 145W x 4 @ 2 Ohm RMS
  • 290W x 2 @ 4 Ohm Bridged RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 19.5" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input

Precision Power S760.4 4 Channel Amplifier

!
  • Sedona 4 Channel Class A/B Amplifier
  • 120W x 4 @ 4 Ohm RMS
  • 190W x 4 @ 2 Ohm RMS
  • 380W x 2 @ 4 Ohm Bridged RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 23" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input

Precision Power S580.5 5 Channel Amplifier

!
  • Sedona 5 Channel Class A/B Amplifier
  • 55W x 4 + 160W x 1 @ 4 Ohm RMS
  • 80W x 4 + 260W x 1 @ 2 Ohm RMS
  • 160W x 2 @ 4 Ohm Bridged RMS
  • Variable High, Low Crossovers: 15Hz - 5KHz
  • Variable Subsonic Crossovers

  • Variable Bass Boost
  • Dimensions: 2.375" H x 9.5" W x 23" L
  • Brushed Aluminum Finish
  • MOSFET Power Supply
  • High & Low Level Input