www.carmedia1.com

Serving you since 1997

Audio Control DQL-8 Digital 8 Line Input Converter

The DQL-8 advanced Line outputconverter is the ultimate OEM Intergarion processor, designed to improve your OEM system while maintaining the look and functions of your factory installed stereo. With the DQL-8 advanced line output converter, you can add aftermarket amplifiers to the factory radio, add an auxiliary source, and equalize the sound to fit your taste.

Audio Control DQXS Digital Equalizer Crossover

The DQXS begins with AudioControl’s full compliment of equalization controls. The front and subwoofer channels offer precise, one-third octave spaced constant-Q equalization for each channel plus two completely programmable parametric equalization controls. The rear channels also have two completely independent parametric equalizers plus 19 one-half octave spaced controls per channel. All told, the DQXS offers users a total of 142 equalization filters!

Audio Control DQX Digital Equalizer

The DQX, digital car audio equalizer from AudioControl, is a great combination of digital car audio processors maximized for performance car audio systems. It combines the amazing digital EQ capabilities of the AudioControl DQT with a fully adjustable three-way electronic car audio crossover.

Audio Control DQT Digital Equalizer

The AudioControl DQT, digital car audio equalizer is “the” digital EQ for any performance car audio system. Specially designed digital signal processing allows us to offer both graphic and parametric digital EQ in one compact chassis.

Audio Control DQS Digital Equalizer

The DQS is a digital car audio processor that combines three high performance digital car audio equalizers in one compact chassis. The six inputs and outputs on the DQS make it ideal for surround sound car theater systems or when using source units with multiple outputs. Even factory installed systems will benefit from the DQS.

Audio Control DDC Digital Dash Control

The DDC is a remote-mountable control that connects to AudioControl digital processors like the DQT, DQX, DQS and DQXS via a 20’ cable. This allows a user to control all functions of their AudioControl processor from another location either inside or outside the vehicle. If more distance is required, the DDC also comes with the DR-1 which is a remote control that controls the functions of the DDC via IR (infrared).

Audio Control THREE.1 In-Dash Equalizer

The THREE.1 is AudioControl’s in-dash car audio processor that combines a four band stereo EQ along with a 4 channel, 2-way electronic crossover. This “one box solution” is a great car audio processor for enthusiasts who want the sonic benefits of AudioControl components but have limited installation space.

Audio Control FOUR.1 In-Dash Equalizer

The FOUR.1i is the car audio processor for you. Designed to be the world’s first professional quality in-dash equalizer, the FOUR.1i bodes such features as 13 volt signal capabilities, a master volume control, and auxiliary inputs for secondary sources. In addition, five equalization controls give just the right amount of control for the user. AudioControl’s line of in-dash car processors offer features and functions that allow you to adjust and tweak your performance car audio system from the convenience of the driver seat. Included are features like equalization, electronic crossovers, master volume control, and high voltage line drivers.

Audio Control EQS Trunk Mount Equalizer

The EQS has seven bands of full and half octave equalization control for the front and rear plus six, one-third octave equalization bands for maximum bass control. Add to that the Programmable Frequency Match (PFM) filter and a low output impedance line driver and you get maximum output and sonic clarity everywhere in the car. And to easily use a factory head unit, the EQS has built-in speaker level inputs. Truly a product for those who consider perfection possible.

Audio Control EQX Trunk Mount Equalizer

An impressive update of the first serious car equalizer/crossover. Thirteen-band dual bandwidth equalization plus Programmable Frequency Match (PFM) filter. Steep 24 dB/octave slope 2-way Linkwitz-Riley electronic crossover easily lets you control a subwoofer for high-impact bass. Accepts speaker level inputs for easy OEM integration.

Audio Control EQL Trunk Mount Equalizer

The EQL works wonders with any 2 channel audio system: From existing factory installed setups to custom audiophile-grade systems. Level-matching circuitry allows connection to either preamp-level or speaker-level inputs. The EQL also features thirteen-band, dual-bandwidth equalization and a Programmable Frequency Match (PFM) filter for precise bass control.

Audio Control 2XS Trunk Mount Crossover

A state-variable, 18 dB/octave, 2-way electronic crossover designed with a flexible and accurate module-programmable crossover frequency. Our exclusive Programmable Frequency Match (PFM) subsonic filter provides exceptional bass control. Winner of the coveted CES "Design and Engineering Excellence Award."

Audio Control 6XS Trunk Mount Crossover

The 6XS does it all. Sharp 24 dB/octave Linkwitz-Riley alignment crossover with remote level control for the bass. Automode™ input switching automatically configures the 6XS for two, four or six channels of input with up to eight channels of output. Includes bass management with the Programmable Frequency Match (PFM) circuit and a high tech PWM power supply for maximum voltage in all conditions.

Audio Control Custom Processors

Audio Control LC8 8 Channel Line Converter

LC8

The LC8 from AudioControl is the latest addition to our line of OEM interface products that connect aftermarket amplifiers with factory installed systems. The high impedance inputs of the LC8 will accept two, four, six or eight amplified speaker level channels (up to 400 watts!) and convert them to a high quality pre-amp signal. The pre-amp signal can then be used to drive a superior after-market audio system, utilizing an OEM source unit.

White 8 Channel line output converter
8 Input and output channels
Signal sensing inputs
Subwoofer input level control
Level matching controls
Speaker level input
Maximum speaker-level input: 400 watts @ 4 ohms
Maximum output level: 9.5Vrms
Output gain: +/-12 dB
Frequency response: 10Hz-22kHz
Total harmonic distortion: 0.01%
Input Impedance: 20 Kohms
Power supply: High headroom PWM switching
Power draw: 200mA
Remote Trigger Output Current: 1 Amp
Recommended fuse rating: 1 Amp
Optional dash control knob with dual color LED (Dash Remote)
Dimensions: 10.5” W x 6” D x 1.2” H
White Only

Audio Control LC6i Line Output Converter

LC6i

The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining use of the factory volume and steering wheel controls. Internal signal summing and AudioControl's new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system.

White Line Output Converter
Six input and output channels
Speaker level inputs
AutoMode(tm) inputs
Signal sensing inputs
Level matching controls
12 volt trigger output
Optional dash control knob with dual color LED (Dash Remote)
Remote-in, Remote out
Colored LED clipping indicator
Maximum speaker-level input: 400 watts @ 4 ohms
Maximum output level: 95Vrms
Output gain: ±12 dB
Frequency response: 10Hz-22kHz
Total harmonic distortion: 001%
Input Impedance: 20 Kohms
Output Impedance: 150 Ohms
Power supply: High headroom PWM switching
Power draw: 200mA
Recommended fuse rating: 1 Amp
Dimensions: 7" W x 5.15" D x 1.2" H
White Only

Audio Control DASH REMOTE Remote Bass Control

DASH REMOTE

Remote for The Epicenter®, The Epicenter® Plus, 6XS, DQL-8, LC6, LC6i, LC7 or LC8

Remote control assembly with 20 foot cable and mounting plate.

Dash Remote Bass Control
Plugs into the Epicenter, Epicenter Plus, 6XS, DQL-8, LC6, LC6i, LC7, LC8 Processor
One Remote Bass
One Remote cable
Under the dash or custom application

Audio Control EPIC-160 Bass Driver

EPIC-160

If you want the best bass possible and a way to measure how loud your system is playing, the EPIC-160 in-dash car audio processor is the perfect product for you. The EPIC-160 is an expert combination of the patented bass enhancement circuits from The Epicenter along with a microphone and a 160-dB SPL (sound pressure level) display.

Black Para-Bass Equalization Bass Driver
Patented Bass maximization Circuitry
Includes 160 dB SPL Microphone and display NEW!
Peak Hold Display
Speaker Level Inputs
Selectable Backlight Colors
Maximum input level: 15 Vrms
Maximum output level: 135 Vpeak
Frequency response: 10Hz-100kHz;+/-1dB
Total harmonic distortion: 0003%
Signal to Noise ratio: - 130dB
Balanced input noise rejection: 60dB
Microphone acoustical level: 70 dB to 160 dB
High SPL Warning: 120 dB
Input Impedance: 10 Kohms
Output Impedance: 160 Ohms
Power supply: High headroom PWM
Power draw: 300mA
Recommended fuse rating: 1 Amp
Size: 6.75" W x 5" D x 1" H

Audio Control EPICENTER PLUS Digital Bass Restoration

EPICENTER PLUS

Adding impactful bass to your factory installed system is simple with The Epicenter® Plus . AudioControl's newest OEM Interface processor converts your speaker-level signals into high quality pre-amp outputs to give you More Bass, LOUDER! Plus , you get an auxiliary input for adding secondary sources (like iPods and Satellite Radio).

White Digital Bass Restoration
Auxiliary Audio input
Cool, Flashing EPICENTER Logo Tracks The Bass
Patented Digital Bass Restoration System
Bass Maximizer Control Get The Most From Every Woofer
Phase Coupled Activator Technology
Dash-mounted Remote Control (Optional DASH REMOTE Shown)
Maximum input level: 15 Vrms
Maximum output level: 13.5 Vpeak
Frequency response: 10Hz-100kHz;+/-1dB
Total harmonic distortion: 0.003%
Signal to Noise ratio: - 130dB
Balanced input noise rejection: > 60dB
Input Impedance: 10 Kohms
Output Impedance: 150 Ohms
Power supply: High headroom PWM
Power draw: 150mA
Recommended fuse rating: 1 Amp
Size: 8" W x 5.5" D x 12" H

Audio Control EPICENTER Line Driver

EPICENTER

Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a patented bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.

White Line Driver
Cool, Flashing EPICENTER Logo Tracks The Bass
Patented Digital Bass Restoration System
Bass Maximizer Control Get The Most From Every Woofer
Phase Coupled Activator Technology
Dash-mounted Remote Control (Optional DASH REMOTE)
Maximum input level: 15 Vrms
Maximum output level: 13.5 Vpeak
Frequency response: 10Hz-100kHz;+/-1dB
Total harmonic distortion: 0.003%
Signal to Noise ratio: - 130dB
Balanced input noise rejection: > 60dB
Input Impedance: 10 Kohms
Output Impedance: 150 Ohms
Power supply: High headroom PWM
Power draw: 150mA
Recommended fuse rating: 1 Amp
Size: 8" W x 5.5" D x 12" H

Audio Control MATRIX Line Driver

MATRIX

For integrating multi-media and video games or for driving dozens of amplifiers, the Matrix gives your system a boost. With multiple sources, like video, the Matrix level matches the different volume levels so switching between them is seamless. For SPL vehicles, the internal linking system of the Matrix means that two channels of input can drive all six outputs and each output can drive up to seven amplifiers.

White Line Driver
Six channels of input and output
24 dB of signal gain – 13 volts peak output
12 dB of signal attenuation
PFM subsonic filter
Output level controls
Balanced differential inputs
Linkable inputs – 2 input channels to 6 output channels
Low impedance outputs
Voltage indicator LED’s
Maximum input/output level: 95Vrms/13V peak
Frequency response: 10Hz-100kHz;±1dB
Total harmonic distortion: 0.005%
Signal to Noise ratio: -110dB
Inputs/Outputs: 2, 4, or 6
Input Impedance: 20 K Ohms
Output impedance: 50 Ohms
Output gain: - 12 dB to + 24 dB
PFM Subsonic Filter: 33Hz/18 dB per octave
Power supply: Transformer isolated PWM DC/DC converter
Power draw: 150mA
Recommended fuse rating: 1 Amp
Size: 8.5" x 6.25" x 1.15"

Audio Control OVERDRIVE Line Driver

OVERDRIVE

Give your system the boost that it needs. The high headroom power supply of the Overdrive raises any pre-amp signal up to 24 dB. The special low-impedance audio driver circuitry ensures that all of your music gets to the other end of the cable without any loss or distortion. No head unit has this kind of output drive power. This provides better dynamic range and a quiet, noise-free signal. Perfect for running those long cables from the front to the back of the vehicle.

White Line Driver
Up to 24dB of Signal Gain
High-headroom PWM Switching Power Supply
13 Volts Peak Output Signal Level
Balanced Differential Inputs and Outputs
2v, 5v, and 75volt Output Signal Level Indicator LEDs Capable of Driving
High Capacitance Cable Loads
Maximum input/output level: 9Vrms/13V peak
Frequency response: 10Hz-100kHz;±1dB
Total harmonic distortion: 0.005%
Signal to Noise ratio: >110dB
Input Impedance: 20Kohms
Output Impedance: 45ohms
Input gain: 0-24dB
Power supply: transformer isolated PWM DC/DC converter
Power draw: 150mA
Recommended fuse rating: 1 Amp
Size 5.0” x 4.25” x 1.25”
Balanced Differential Inputs
Input Ground Isolation Jumpers
Output Ground Isolation Jumpers

Shopping cart by ShopFactory