Powerbass XTA Amplifiers
The XTA amplifiers starts with a low profile, high density aluminum heatsink with a massive top plate for maximum heat dissipation. All new 45˚ brass terminals were tooled for speaker and power to accept large gauge wire so these amplifiers can produce the maximum output to your speakers. Low level RCA inputs AND outputs are on each model so you can send a full range signal on to additional amplifiers for a professional and efficient system design.
!

Powerbass XTA-5000D Mono Amplifier
XTA-5000D
!
powerbass xta-5000d
Special order item !!!
  • Class D Mono Amplifier
  • 1 x 1250 Watts @ 4 Ohm
  • 1 x 2500 Watts @ 2 Ohm
  • 1 x 5000 Watts @ 1 Ohm
  • Bi-Amp Bridge Strapped Power: 10,000 Watts
  • Total Harmonic Distortion: <0.1%
  • Frequency Response: 18Hz - 250Hz
  • High-Pass Crossover Frequency: 50Hz - 250Hz
  • 24 dB/Octave Electronic Crossover: Variable LPF 20Hz - 1.5KHz
  • Variable Subwoofer EQ: 0/+18 dB @ 45Hz
  • S/N Ratio: >94 dB/W/M
  • Damping Factor: >200
  • Input Sensitivity: 0.2mV - 6.0 Volts
  • 4 Gauge Power and Ground Inputs
  • Remote Bass Control Included
  • Dimensions: 20.87"(L) x 10.51"(W) x 2.56"(H)
  • Strap Two Amplifiers Together for Double the Power Output
  • Self-Diagnostic Protection Circuitry: Short Circuit/Thermal Overheating/ Impedance Overload and DC Output

Powerbass XTA-4000D Mono Amplifier
XTA-4000D
!
powerbass xta-4000d
Special order item !!!
  • Class D Mono Amplifier
  • 1 x 1000 Watts @ 4 Ohm
  • 1 x 2000 Watts @ 2 Ohm
  • 1 x 4000 Watts @ 1 Ohm
  • Bi-Amp Bridge Strapped Power: 8000 Watts
  • Total Harmonic Distortion: <0.1%
  • Frequency Response: 18Hz - 250Hz
  • High-Pass Crossover Frequency: 50Hz - 250Hz
  • 24 dB/Octave Electronic Crossover: Variable LPF 20Hz - 1.5KHz
  • Variable Subwoofer EQ: 0/+18 dB @ 45Hz
  • S/N Ratio: >94 dB/W/M
  • Damping Factor: >200
  • Input Sensitivity: 0.2mV - 6.0 Volts
  • 4 Gauge Power and Ground Inputs
  • Remote Bass Control Included
  • Dimensions: 25.5"(L) x 10.51"(W) x 2.56"(H)
  • Bi-Amp Bridge ability: Strap Two Amplifiers Together for Double the Power Output
  • Self-Diagnostic Protection Circuitry: Short Circuit/Thermal Overheating/ Impedance Overload and DC Output

Powerbass XTA-1500D Mono Amplifier
XTA-1500D
!
powerbass xta-1500d
  • Class D Mono Amplifier
  • 1 x 450 Watts @ 4 Ohm
  • 1 x 850 Watts @ 2 Ohm
  • 1 x 1500 Watts @ 1 Ohm
  • Bi-Amp Bridge Strapped Power: 2500 Watts
  • Total Harmonic Distortion: <0.5%
  • Frequency Response: 18Hz - 250Hz
  • High-Pass Crossover Frequency: 50Hz - 250Hz
  • 24 dB/Octave Electronic Crossover: Variable LPF 20Hz - 1.5KHz
  • Variable Subwoofer EQ: 0/+18 dB @ 45Hz
  • S/N Ratio: >94 dB/W/M
  • Damping Factor: >200
  • Input Sensitivity: 0.2mV - 6.0 Volts
  • 4 Gauge Power and Ground Inputs
  • Remote Bass Control Included
  • Dimensions: 14.7"(L) x 10.51"(W) x 2.56"(H)
  • Strap Two Amplifiers Together for Double the Power Output
  • Self-Diagnostic Protection Circuitry: Short Circuit/Thermal Overheating/ Impedance Overload and DC Output

Powerbass XTA-1000D Mono Amplifier
XTA-1000D
!
powerbass xta-1000d
  • Class D Mono Amplifier
  • 1 x 425 Watts @ 4 Ohm
  • 1 x 725 Watts @ 2 Ohm
  • 1 x 1000 Watts @ 1 Ohm
  • Bi-Amp Bridge Strapped Power: 2000 Watts
  • Total Harmonic Distortion: <0.1%
  • Frequency Response: 18Hz - 250Hz
  • High-Pass Crossover Frequency: 50Hz - 250Hz
  • 24 dB/Octave Electronic Crossover: Variable LPF 20Hz - 1.5KHz
  • Variable Subwoofer EQ: 0/+18 dB @ 45Hz
  • S/N Ratio: >94 dB/W/M
  • Damping Factor: >200
  • Input Sensitivity: 0.2mV - 6.0 Volts
  • 4 Gauge Power and Ground Inputs
  • Remote Bass Control Included
  • Dimensions: 11"(L) x 10.51"(W) x 2.56"(H)
  • Strap Two Amplifiers Together for Double the Power Output
  • Self-Diagnostic Protection Circuitry: Short Circuit/Thermal Overheating/ Impedance Overload and DC Output

Powerbass XTA-2160 2 Channel Amplifier
XTA-2160
!
powerbass xta-2160
  • Class A/B 2 Channel Amplifier
  • 2 x 100 Watts @ 4 Ohm
  • 2 x 160 Watts @ 2 Ohm
  • 1 x 320 Watts @ 4 Ohm Bridged
  • Total Harmonic Distortion: <0.02%
  • Frequency Response: 15Hz - 40KHz
  • High-Pass Crossover Frequency: 50Hz - 250Hz
  • Low-Pass Crossover Frequency: 40Hz - 240Hz
  • 12 dB/Octave Electronic Crossover: Variable LPF 20Hz - 1.5KHz
  • Variable Subwoofer EQ: 0/+18 dB @ 45Hz
  • S/N Ratio: >90 dB/W/M
  • Damping Factor: >200
  • Input Sensitivity: 0.2mV - 6.0 Volts
  • Nickel Plated Solid Brass Power and Ground Inputs
  • Optional Remote Bass Control
  • Dimensions: 10.25"(L) x 10.75"(W) x 2.75"(H)
  • Self-Diagnostic Protection Circuitry: Short Circuit/Thermal Overheating/ Impedance Overload and DC Output

Powerbass XTA-2240 2 Channel Amplifier
XTA-2240
!
powerbass xta-2240
  • Class A/B 2 Channel Amplifier
  • 2 x 130 Watts @ 4 Ohm
  • 2 x 240 Watts @ 2 Ohm
  • 1 x 480 Watts @ 4 Ohm Bridged
  • Total Harmonic Distortion: <0.02%
  • Frequency Response: 15Hz - 40KHz
  • High-Pass Crossover Frequency: 80Hz - 1.5KHz
  • Low-Pass Crossover Frequency: 40Hz - 500Hz
  • 12 dB/Octave Electronic Crossover: Variable LPF 20Hz - 1.5KHz
  • Variable Subwoofer EQ: 0/+18 dB @ 45Hz
  • S/N Ratio: >90 dB/W/M
  • Damping Factor: >200
  • Input Sensitivity: 0.2mV - 6.0 Volts
  • Nickel Plated Solid Brass Power and Ground Inputs
  • Optional Remote Bass Control
  • Dimensions: 13.78"(L) x 10.75"(W) x 2.75"(H)
  • Self-Diagnostic Protection Circuitry: Short Circuit/Thermal Overheating/ Impedance Overload and DC Output

Powerbass XTA-4140 4 Channel Amplifier
XTA-4140
!
powerbass xta-4140
  • Class A/B 4 Channel Amplifier
  • 4 x 75 Watts @ 4 Ohm
  • 4 x 140 Watts @ 2 Ohm
  • 2 x 280 Watts @ 4 Ohm Bridged
  • Total Harmonic Distortion: <0.02%
  • Frequency Response: 15Hz - 40KHz
  • High-Pass Crossover Frequency: 80Hz - 1.5KHz
  • Low-Pass Crossover Frequency: 40Hz - 500Hz
  • 12 dB/Octave Electronic Crossover: Variable LPF 20Hz - 1.5KHz
  • Variable Subwoofer EQ: 0/+18 dB @ 45Hz
  • S/N Ratio: >90 dB/W/M
  • Damping Factor: >200
  • Input Sensitivity: 0.2mV - 6.0 Volts
  • Nickel Plated Solid Brass Power and Ground Inputs
  • Optional Remote Bass Control
  • Dimensions: 13.78"(L) x 10.75"(W) x 2.75"(H)
  • Self-Diagnostic Protection Circuitry: Short Circuit/Thermal Overheating/ Impedance Overload and DC Output