Audiopipe Car Sound Processors

Bookmark and Share

!

Audiopipe XV-3 Electronic Crossover

!
  • 3 Way Electronic Crossover
  • Frequency Response: 10Hz-30KHz ± 3dB
  • Front Crossover Frequencies: High-Pass: (X1), 32-800Hz (X10), 320-8KHz
  • Rear Crossover Frequencies High-Pass: 32-800Hz
  • Subwoofer Frequency: 50-160Hz
  • Subwoofer: Boost: Single Octave 0dB to 12dB (Variable) @ 40 to 120Hz Variable
  • Crossover Slope Rate: 12dB per Octave 2nd Order Butter Worth
  • Separation: 60dB
  • Distortion: 0.01 % THD at 1.V Output Level
  • S/N Ratio (A Weighted) > 95kB
  • Input Current: 0.5 Amp Max.
  • Input Impedance: >20K Ohms
  • Output Impedance: < 1 K Ohm
  • Output Gain: ± 3dB
  • Output Voltage Level: 5 Volts Maximum

Audiopipe EQ-4X 4 Band Equalizer

!
  • 4 Band Graphic EQ with 4V Line Driver
  • Built-In 3 Way Crossover with Line Driver
  • Portable Input Jack with Automatic Selection Switch
  • Front/Rear Output with Fader Control
  • 4 Volt Line Output
  • Mini Jack Audio Input
  • Sub Gain Control with Separate Frequency Control
  • Crossover: Low Pass for Subwoofer Channel, 18dB/Oct
  • Ground Isolation Selector
  • 1" H x 6.8" W x 5" D

Audiopipe EQ-7X 4 Band Parametric Equalizer

!

 

  • In-Dash Equalizer/Pre-Amp
  • 4-Band Parametric EQ with 18dB Boost / Cut
  • Adjustable Subwoofer Freq: 60Hz/90Hz
  • Universal Half-Din Chassis for Easy Install
  • 8V Output, DVD Input, Audio Input
  • Active Gain Pre-amplifiers with Adjustable Input Sensitivity
  • Adjustable Gain with up to 8V Output
  • Individual Left and Right Sensitivity Controls for DVD Input
  • Low Noise BI-FET Op-Amp Design Yields Minimum Distortion
  • On-Board 30V Bi-Polar Switching Power Supply
  • Subwoofer Output and Level Controls
  • Gold-plated RCA Input Connectors
  • 20dB Headroom Eliminates Signal Overload
  • Main / DVD Input Selector
  • Dimensions: 1" (H) x 6.8" (W) x 3.8" (D)