JBL Car Speakers

Bookmark and Share

!

JBL 660GTi 6.5" GTi Component Speakers

!
  • One Pair of 6.5" GTi Component Speakers
  • Peak Power Handling: 600 Watts
  • RMS Power Handling: 150 Watts
  • Sensitivity: (2.83V @ 1m) 91dB
  • Neodymium Woofer Magnet
  • Cast Aluminum Basket
  • 1" Edge-Driven EOS Constant-Directivity-Waveguide Tweeters
  • Frequency Response: 50Hz – 30kHz
  • Crossover Frequency: 2500Hz
  • Crossover Precision 4th Order Acoustic Outboard Passive Crossover
  • Voice-Coil Diameter: 2" (50mm)
  • Impedance 4 ohms
  • Cone Plus One® (patent pending) Kevlar® Woofer Cone
  • Vented Basket, Polepiece and Voice Coil Former
  • Copper Polepiece Cap and a Flux Stabilization Ring Motor
  • BL (TM): 7.56
  • DCR (ohms): 3.48
  • MMS (g): 17.94
  • SD (sq cm): 132.7
  • CMS (µm/N): 382
  • VAS (l): 9.45
  • FS (Hz): 60.8
  • QES: 0.42
  • QMS: 10.17
  • QT: 0.4
  • 1wSPL (dB0): 89
  • SPL 2.83V: 92.6
  • HVC (mm): 17.27
  • HAG (mm): 6
  • XMAX: 5.36
  • VB: 288,890mm3
  • LEVC (mHz): 0.13

JBL C608GTi MKii 6.5" GTi Component Speakers

!

The woofer cone developed for the C608GTi MKII is anodized aluminum. This material moves the first-modal cone-body breakup to a high frequency outside the operating band, significantly reducing distortion and maximizing midrange clarity. The C608GTi MKII utilizes an outboard crossover with a 3500Hz fourth-order Linkwitz-Riley acoustic alignment

  • 6.5" GTi Component speakers
  • Anodized aluminum construction woofers
  • Pure titanium dome tweeters
  • RMS power handling: 150 watts
  • Max power handling: 600 watts
  • Frequency response: 50Hz - 21KHz
  • Sensitivity: 89dB
  • Crossovers type: 4th-order Linkuitz-Riley Acoustic
  • Crossover frequencies: 3500Hz, 24dB/Oct.
  • Tweeter response adjustment: +2dB or -2dB
  • Tweeter mounting depth: 1-1/8"
  • Woofer mounting depth: 2-11/16"

JBL C508GTi MKii 5.25" GTi Component Speakers

!

The woofer cone developed for the C508GTi is anodized aluminum. This material moves the first-modal cone-body breakup to a high frequency outside the operating band, significantly reducing distortion and maximizing midrange clarity. An optimized nitrobutylene (NBR) low-loss surround material is used to damp cone breakup modes. The tweeter featured in the C508GTi MKII system uses a pure titanium dome suspended by a rubber surround to optimize output and reduce distortions that travel along the tweeter’s dome. The tweeter featured in the C608GTi MKII system uses a pure titanium dome suspended by a rubber surround to optimize output and reduce distortions that travel along the tweeter's dome.

  • 5.25" GTi Component speakers
  • Anodized aluminum construction woofers
  • Pure titanium dome tweeters
  • RMS power handling: 125 watts
  • Max power handling: 500 watts
  • Frequency response: 48Hz - 21KHz
  • Sensitivity: 88dB
  • Crossovers type: 4th-order Linkuitz-Riley Acoustic
  • Crossover frequencies: 3500Hz, 24dB/Oct.
  • Tweeter response adjustment: +2dB or -2dB
  • Tweeter mounting depth: 1-1/8"
  • Woofer mounting depth: 2-3/8"

JBL P660C 6.5" Power Component Speakers

!

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels.

  • 6.5" Power Component speakers
  • Pure titanium dome tweeters
  • RMS power handling: 90 watts
  • Max power handling: 270 watts
  • Frequency response: 45Hz - 23KHz
  • Sensitivity: 90dB
  • Passive external crossovers
  • Tweeter response adjustment: 0dB or -3dB
  • Tweeter mounting depth: 1-3/16"
  • Woofer mounting depth: 2-1/4"

JBL P560C 5.25" Power Component Speakers

!

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels. The P560C’s tweeter features JBL’s I-Mount™ tweeter mounting system (patent no. 5,859,917), which allows for precise imaging and easy installation.

  • 5.25" Power Component speakers
  • Pure titanium dome tweeters
  • RMS power handling: 70 watts
  • Max power handling: 210 watts
  • Frequency response: 55Hz - 23KHz
  • Sensitivity: 89dB
  • Passive external crossovers
  • Tweeter response adjustment: 0dB or -3dB
  • Tweeter mounting depth: 1-3/16"
  • Woofer mounting depth: 2-3/16"

JBL P26T 1" Power Tweeters

!

High-bandwidth edge-driven dome tweeters - These are not commonly used miniature cone tweeters, but full edge-driven domes like those found in high end home audio loudspeakers. The benefits of this full edge-driven topology are reduced distortion at high output levels and superior integration with the mid/woofer.

  • 1" Power Tweeters
  • Pure titanium dome tweeters
  • RMS power handling: 60 watts
  • Max power handling: 180 watts
  • Frequency response: 2.5KHz - 23KHz
  • Sensitivity: 90dB
  • Tweeter mounting depth: 1-3/16"
  • Tweeter cut out diameter: 1-3/4"

JBL P462 4" 2 Way Power Speakers

!

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels.

  • 4" Power 2 Way speakers
  • Pure titanium dome tweeter
  • RMS power handling: 50 watts
  • Max power handling: 150 watts
  • Frequency response: 75Hz - 23KHz
  • Sensitivity: 89dB
  • Passive external matching crossovers
  • Mounting depth: 2" (51mm)
  • Cutout diameter: 3-1/2" (89mm)

JBL P6462 4 x 6" 2 Way Power Plate Speakers

!

4" x 6" 2-Way Plate Loudspeaker with Plus One HCL Woofer Cone and high-bandwidth edge-driven textile dome tweeter.

  • 4" x 6" Power 2 Plate Way speakers
  • Pure titanium dome tweeter
  • RMS power handling: 50 watts
  • Max power handling: 150 watts
  • Frequency response: 75Hz - 23KHz
  • Sensitivity: 89dB
  • Passive external matching crossovers
  • Mounting depth: 2-1/16" (53mm)
  • Cut out diameter: 5-5/8" x 4" (143mm) x (102mm)

JBL P562 5.25" 2 Way Power Speakers

!

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels.

  • 5.25" Power 2 Way speakers
  • Pure titanium dome tweeter
  • RMS power handling: 55 watts
  • Max power handling: 165 watts
  • Frequency response: 55Hz - 23KHz
  • Sensitivity: 89dB
  • Passive external matching crossovers
  • Mounting depth: 2-3/16" (56mm)
  • Cutout diameter: 4-11/16" (120mm)

JBL P662 6.5" 2 Way Power Speakers

!

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels.

  • 6.5" Power 2 Way speakers
  • Pure titanium dome tweeter
  • RMS power handling: 75 watts
  • Max power handling: 225 watts
  • Frequency response: 45Hz - 23KHz
  • Sensitivity: 90dB
  • Passive external matching crossovers
  • Mounting depth: 2-1/4" (58mm)
  • Cut out diameter: 5-1/16" (129mm)

JBL P8662 6 x 8" 2 Way Power Speakers

!

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels.

  • 6" x 8" Power 2 Way speakers
  • Pure titanium dome tweeter
  • RMS power handling: 75 watts
  • Max power handling: 210 watts
  • Frequency response: 40Hz - 23KHz
  • Sensitivity: 90dB
  • Passive external matching crossovers
  • Mounting depth: 2-7/16" (62mm)
  • Cut out diameter: 7-3/16" x 4-15/16" (129mm) x (126mm)

JBL P963 6 x 9" 3 Way Speakers

!

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels.

  • 6" x 9" Power 3 Way speakers
  • Pure titanium dome tweeters
  • RMS power handling: 110 watts
  • Max power handling: 330 watts
  • Frequency response: 35Hz - 23KHz
  • Sensitivity: 90dB
  • Passive external matching crossovers
  • Mounting depth: 3-15/16" (85mm)
  • Cut out diameter: 8-11/16" x 5-7/8" (221mm) x (150mm)