Orion Subwoofers

 

!

Orion CO104S Cobalt 10" Subwoofer

CO104S
!

  • Cobalt 10" subwoofer
  • 400 Watts max power handling
  • 200 Watts RMS power handling
  • Sensitivity: 86.1dB
  • Qts: .57
  • Fs: 39.2Hz
  • Vas: 1.080 Cu. ft.
  • XMax: 10.29mm
  • Polypropylene dust cap - moisture and UV resistant
  • Oversized NBR (Nitrile-butadiene Rubber) surround for linear controlled long excursion
  • Vented paper cone - moisture and UV resistant.4Custom stamped steel frame
  • 1.5" Vented Kapton voice coil former
  • 8mm steel front plate
  • Large 2 stack ceramic magnets.88mm steel back plate/pole piece T yoke assembly
  • .75" vent. Part of the enhanced voice coil cooling system (forced convection)
  • PVC magnet protector
  • High temperature Copper 4 ohm voice coil
  • Venting in voice coil former, part of the enhanced voice coil cooling system (forced convection)
  • Interlaced Conex spider with stitched and looped tinsel leads attached
  • Push Terminals
  • Reversible PVC mounting gasket

Orion CO124S Cobalt 12" Subwoofer

CO124S
!

  • Cobalt 12" subwoofer
  • 400 Watts max power handling
  • 200 Watts RMS power handling
  • Sensitivity: 87.2dB
  • Qts: .49
  • Fs: 25.6Hz
  • Vas: 4.017 Cu. ft.
  • XMax: 10.40mm
  • Polypropylene dust cap - moisture and UV resistant
  • Oversized NBR (Nitrile-butadiene Rubber) surround for linear controlled long excursion
  • Vented paper cone - moisture and UV resistant.4Custom stamped steel frame
  • 1.5" Vented Kapton voice coil former
  • 8mm steel front plate
  • Large 2 stack ceramic magnets.88mm steel back plate/pole piece T yoke assembly
  • .75" vent. Part of the enhanced voice coil cooling system (forced convection)
  • PVC magnet protector
  • High temperature Copper 4 ohm voice coil
  • Venting in voice coil former, part of the enhanced voice coil cooling system (forced convection)
  • Interlaced Conex spider with stitched and looped tinsel leads attached
  • Push Terminals
  • Reversible PVC mounting gasket

Orion CO154S Cobalt 15" Subwoofer

CO154S
!

  • Cobalt 15" subwoofer
  • 600 Watts max power handling
  • 250 Watts RMS power handling
  • Sensitivity: 89.9dB
  • Qts: .47
  • Fs: 25.2Hz
  • Vas: 7.098 Cu. ft.
  • XMax: 11.50mm
  • Polypropylene dust cap - moisture and UV resistant
  • Oversized NBR (Nitrile-butadiene Rubber) surround for linear controlled long excursion
  • Vented paper cone - moisture and UV resistant.4Custom stamped steel frame
  • 2" Vented Kapton voice coil former
  • 8mm steel front plate
  • Large 2 stack ceramic magnets.88mm steel back plate/pole piece T yoke assembly
  • .75" vent. Part of the enhanced voice coil cooling system (forced convection)
  • PVC magnet protector
  • High temperature Copper 4 ohm voice coil
  • Venting in voice coil former, part of the enhanced voice coil cooling system (forced convection)
  • Interlaced Conex spider with stitched and looped tinsel leads attached
  • Push Terminals
  • Reversible PVC mounting gasket