Orion Car Audio
Bookmark and Share
Orion Car Audio has been all about High Performance Car Audio and Hardcore Attitude since the beginning. Orion products include amplifiers, subwoofers, coaxial speakers, component speakers, sub enclosures, wiring accessories and more. If you are in the market for a car audio product like an amplifier, subwoofer or speaker, there is no better brand then Orion. Orion's HCCA, XTR, XTR Pro and Cobalt lines of amplifiers, subwoofers and speakers lead the industry in performance.
!

Orion CO8001 Cobalt Mono Amplifier
!
orion co8001
  • RMS Power: 1 x 300 Watts @ 4 Ohms
  • RMS Power: 1 x 400 Watts @ 2 Ohms
  • Peak Power: 800 Watts
  • Distortion at Rated Power: < 0.9% THD+N
  • Frequency Response 20Hz to 30kHz (+/- 1 dB)
  • Linear Bandwidth: 20Hz - 20kHz (±3dB)
  • Bass Boost: 0/6/12dB
  • Low-Pass Crossover: Continuously variable/2nd Order
  • Crossover Frequency Range: 50Hz to 500Hz @ 12dB/Oct.
  • Damping Factor: > 150
  • Voltage Input Sensitivity: 175mV - 8V
  • Input Impedance: > 80kOhm
  • High and Low Level Inputs
  • 4Ga. Power Cables Input
  • RGC-2 Remote Bass Control Included
  • Dimensions: (H) 2.1" x (W) 8.1" x (L) 13.4"

Orion CO5001 Cobalt Mono Amplifier
!
orion co5001
  • RMS Power: 1 x 175 Watts @ 4 Ohms
  • RMS Power: 1 x 250 Watts @ 2 Ohms
  • Peak Power: 500 Watts
  • Distortion at Rated Power: < 0.9% THD+N
  • Frequency Response 20Hz to 30kHz (+/- 1 dB)
  • Linear Bandwidth: 20Hz - 20kHz (±3dB)
  • Bass Boost: 0/6/12dB
  • Low-Pass Crossover: Continuously variable/2nd Order
  • Crossover Frequency Range: 50Hz to 500Hz @ 12dB/Oct.
  • Damping Factor: > 150
  • Voltage Input Sensitivity: 175mV - 8V
  • Input Impedance: > 80kOhm
  • High and Low Level Inputs
  • 4Ga. Power Cables Input
  • RGC-2 Remote Bass Control Included
  • Dimensions: (H) 2.1" x (W) 8.1" x (L) 11.4"

Orion CO6002 Cobalt 2 Channel Amplifier
!
orion co6002
  • RMS Power: 2 x 100 Watts @ 4 Ohms
  • RMS Power: 2 x 155 Watts @ 2 Ohms
  • Peak Power: 600 Watts
  • Distortion at Rated Power: < 0.7% THD+N
  • Frequency Response 20Hz to 30kHz (+/- 0.5 dB)
  • Linear Bandwidth: 20Hz - 20kHz (±3dB)
  • Bass Boost: 0/6/12dB
  • Low-Pass & High-Pass Crossover: Continuously variable/2nd Order
  • Crossover Frequency Range: 50Hz to 500Hz @ 12dB/Oct.
  • Damping Factor: > 100
  • Voltage Input Sensitivity: 175mV - 8V
  • Input Impedance: > 10k
  • High and Low Level Inputs
  • 4Ga. Power Cables Input
  • Dimensions: (H) 2.1" x (W) 8.1" x (L) 11.4"

Orion CO3002 Cobalt 2 Channel Amplifier
!
orion co3002
  • RMS Power: 2 x 60 Watts @ 4 Ohms
  • RMS Power: 2 x 80 Watts @ 2 Ohms
  • RMS Power: 1 x 160 Watts @ 4 Ohm Bridged
  • Distortion at Rated Power: < 0.5% THD+N
  • Frequency Response 20Hz to 30kHz (+/- 0.5 dB)
  • Linear Bandwidth: 20Hz - 20kHz (±3dB)
  • Bass Boost: 0/6/12dB
  • Low-Pass & High-Pass Crossover: Continuously variable/2nd Order
  • Crossover Frequency Range: 50Hz to 500Hz @ 12dB/Oct.
  • Damping Factor: > 100
  • Voltage Input Sensitivity: 175mV - 8V
  • Input Impedance: > 15k
  • High and Low Level Inputs
  • 4Ga. Power Cables Input
  • Dimensions: (H) 2.1" x (W) 8.1" x (L) 7.9"

Orion CO6004 Cobalt 4 Channel Amplifier
!
orion co6004
  • RMS Power: 4 x 60 Watts @ 4 Ohms
  • RMS Power: 4 x 75 Watts @ 2 Ohms
  • Peak Power: 600 Watts
  • Distortion at Rated Power: < 0.9% THD+N
  • Frequency Response 20Hz to 30kHz (+/- 0.5 dB)
  • Linear Bandwidth: 20Hz - 20kHz (±3dB)
  • Bass Boost: 0/6/12dB
  • Low-Pass & High-Pass Crossover: Continuously variable/2nd Order
  • Crossover Frequency Range: 50Hz to 500Hz @ 12dB/Oct.
  • Damping Factor: > 100
  • Voltage Input Sensitivity: 175mV - 8V
  • Input Impedance: > 10k
  • High and Low Level Inputs
  • 4Ga. Power Cables Input
  • Dimensions: (H) 2.1" x (W) 8.1" x (L) 13.4"

Orion CO652 Cobalt 6.5" Component Speakers
!
orion co652
  • Cobalt 6.5" Component Speakers
  • RMS Power: 50 Watts
  • Peak Power: 120 Watts
  • Frequency Response: 60Hz - 20Khz
  • Sensitivity: 85dB
  • Moisture and UV resistant paper cone
  • NBR surround
  • Metalized PEI Tweeter
  • 2 Layer Copper Clad Aluminum Wire (CCAW) Voice Coil
  • Single Flat Interlaced Conex Spider with tinsel leads woven to spider
  • Custom crossover with 6dB High and Low pass
  • Custom tweeter mounting kits including swivel/surface
  • Stamped Steel Basket with Euro mounting configurations
  • Installation templates, wire, & screw kits for installation are included

Orion CO552 Cobalt 5.25" Component Speakers
!
orion co552
  • Cobalt 5.25" Component Speakers
  • RMS Power: 40 Watts
  • Peak Power: 100 Watts
  • Frequency Response: 120Hz - 20Khz
  • Sensitivity: 87dB
  • Moisture and UV resistant paper cone
  • NBR surround
  • Metalized PEI Tweeter
  • 2 Layer Copper Clad Aluminum Wire (CCAW) Voice Coil
  • Single Flat Interlaced Conex Spider with tinsel leads woven to spider
  • Custom crossover with 6dB High and Low pass
  • Custom tweeter mounting kits including swivel/surface
  • Stamped Steel Basket with Euro mounting configurations
  • Installation templates, wire, & screw kits for installation are included

Orion CO690 Cobalt 6x9" Speakers
!
orion co690
  • Cobalt 6x9" 2 Way Speakers
  • RMS Power: 60 Watts
  • Peak Power: 130 Watts
  • Frequency Response: 63Hz - 20Khz
  • Sensitivity: 88.8dB
  • Mounting depth: 2.95"
  • Mounting diameter: 6.1" x 8.75"
  • Moisture and UV resistant paper cone
  • NBR surround
  • Metalized PEI swival tweeter
  • 2 Layer Copper Clad Aluminum Wire (CCAW) Voice Coil
  • Single Interlaced Conex Spider with tinsel leads woven to spider
  • Custom crossover with 6dB High and Low pass tweeter protection
  • Stamped Steel Basket with Euro mounting configurations
  • Installation templates, wire, & screw kits for installation are included

Orion C570 Cobalt 5x7" Speakers
!
orion co570
  • Cobalt 5x7" 2 Way Speakers
  • RMS Power: 40 Watts
  • Peak Power: 100 Watts
  • Frequency Response: 98Hz - 20Khz
  • Sensitivity: 87.9dB
  • Mounting depth: 2.32"
  • Mounting diameter: 5.1 x 7.1""
  • Moisture and UV resistant paper cone
  • NBR surround
  • Metalized PEI swival tweeter
  • 2 Layer Copper Clad Aluminum Wire (CCAW) Voice Coil
  • Single Interlaced Conex Spider with tinsel leads woven to spider
  • Custom crossover with 6dB High and Low pass tweeter protection
  • Stamped Steel Basket with Euro mounting configurations
  • Installation templates, wire, & screw kits for installation are included
  • No grills

    • Orion CO650 Cobalt 6.5" Speakers
    !
    orion co650
    • Cobalt 6.5" 2 Way Speakers
    • RMS Power: 50 Watts
    • Peak Power: 120 Watts
    • Frequency Response: 62Hz - 20Khz
    • Sensitivity: 85.2dB
    • Mounting depth: 2.6"
    • Mounting diameter: 5.63"
    • Moisture and UV resistant paper cone
    • NBR surround
    • Metalized PEI swival tweeter
    • 2 Layer Copper Clad Aluminum Wire (CCAW) Voice Coil
    • Single Interlaced Conex Spider with tinsel leads woven to spider
    • Custom crossover with 6dB High and Low pass tweeter protection
    • Stamped Steel Basket with Euro mounting configurations
    • Installation templates, wire, & screw kits for installation are included

    Orion CO500 Cobalt 5.25" Speakers
    !
    orion co500
    • Cobalt 5.25" 2 Way Speakers
    • RMS Power: 40 Watts
    • Peak Power: 100 Watts
    • Frequency Response: 110Hz - 20Khz
    • Sensitivity: 87.1dB
    • Mounting depth: 1.97"
    • Mounting diameter: 4.72"
    • Moisture and UV resistant paper cone
    • NBR surround
    • Metalized PEI swival tweeter
    • 2 Layer Copper Clad Aluminum Wire (CCAW) Voice Coil
    • Single Interlaced Conex Spider with tinsel leads woven to spider
    • Custom crossover with 6dB High and Low pass tweeter protection
    • Stamped Steel Basket with Euro mounting configurations
    • Installation templates, wire, & screw kits for installation are included

    Orion CO104S Cobalt 10" Subwoofer
    !
    orion cobalt 4 ohm subwoofer

    • Cobalt 10" subwoofer
    • 400 Watts max power handling
    • 200 Watts RMS power handling
    • Sensitivity: 86.1dB
    • Qts: .57
    • Fs: 39.2Hz
    • Vas: 1.080 Cu. ft.
    • XMax: 10.29mm
    • Polypropylene dust cap - moisture and UV resistant
    • Oversized NBR (Nitrile-butadiene Rubber) surround for linear controlled long excursion
    • Vented paper cone - moisture and UV resistant.4Custom stamped steel frame
    • 1.5" Vented Kapton voice coil former
    • 8mm steel front plate
    • Large 2 stack ceramic magnets.88mm steel back plate/pole piece T yoke assembly
    • .75" vent. Part of the enhanced voice coil cooling system (forced convection)
    • PVC magnet protector
    • High temperature Copper 4 ohm voice coil
    • Venting in voice coil former, part of the enhanced voice coil cooling system (forced convection)
    • Interlaced Conex spider with stitched and looped tinsel leads attached
    • Push Terminals
    • Reversible PVC mounting gasket

    Orion CO124S Cobalt 12" Subwoofer
    !
    orion cobalt 4 ohm subwoofer

    • Cobalt 12" subwoofer
    • 400 Watts max power handling
    • 200 Watts RMS power handling
    • Sensitivity: 87.2dB
    • Qts: .49
    • Fs: 25.6Hz
    • Vas: 4.017 Cu. ft.
    • XMax: 10.40mm
    • Polypropylene dust cap - moisture and UV resistant
    • Oversized NBR (Nitrile-butadiene Rubber) surround for linear controlled long excursion
    • Vented paper cone - moisture and UV resistant.4Custom stamped steel frame
    • 1.5" Vented Kapton voice coil former
    • 8mm steel front plate
    • Large 2 stack ceramic magnets.88mm steel back plate/pole piece T yoke assembly
    • .75" vent. Part of the enhanced voice coil cooling system (forced convection)
    • PVC magnet protector
    • High temperature Copper 4 ohm voice coil
    • Venting in voice coil former, part of the enhanced voice coil cooling system (forced convection)
    • Interlaced Conex spider with stitched and looped tinsel leads attached
    • Push Terminals
    • Reversible PVC mounting gasket

    Orion CO154S Cobalt 15" Subwoofer
    !
    orion cobalt 4 ohm subwoofer

    • Cobalt 15" subwoofer
    • 600 Watts max power handling
    • 250 Watts RMS power handling
    • Sensitivity: 89.9dB
    • Qts: .47
    • Fs: 25.2Hz
    • Vas: 7.098 Cu. ft.
    • XMax: 11.50mm
    • Polypropylene dust cap - moisture and UV resistant
    • Oversized NBR (Nitrile-butadiene Rubber) surround for linear controlled long excursion
    • Vented paper cone - moisture and UV resistant.4Custom stamped steel frame
    • 2" Vented Kapton voice coil former
    • 8mm steel front plate
    • Large 2 stack ceramic magnets.88mm steel back plate/pole piece T yoke assembly
    • .75" vent. Part of the enhanced voice coil cooling system (forced convection)
    • PVC magnet protector
    • High temperature Copper 4 ohm voice coil
    • Venting in voice coil former, part of the enhanced voice coil cooling system (forced convection)
    • Interlaced Conex spider with stitched and looped tinsel leads attached
    • Push Terminals
    • Reversible PVC mounting gasket