Dynamat Car Accessories
Bookmark and Share

Dynamat, a Dynamic Control brand, is recognized by consumers around the world as a quality product for solutions to unwanted noise and vibration. The Dynamat brand maintains the dominant marketshare in Car Audio and Automotive Restoration acoustic solutions. Dynamic Control also provides a broad range of unique product solutions for home acoustics, computers, appliances, and Original Equipment Manufacturers.

!

Dynamat 10415 Xtreme Speaker Kit

!
  • Two 10" x 10" pieces of Dynamat Xtreme

Dynamat XTREME is a butyl composite with aluminum constraining layer, sheet metal vibrational damper.  Dynamat XTREME is made to conform and fuse to sheet metal and other hard substrates: automotive body surfaces such as floor pans and doors.  Product can be die cut to shape and placed onto the body surface after sheet metal cleaning operation and prior to paint system (typically a t the sealer application operation) or on painted panels.  Material can withstand temperature ranges between -54°C to +149°C (-65°F to +300°F) and is highly resistant to aging.

Dynamat 10425 Xtreme Wedge Pack

!
  • One 18"x 32" (1) 457mm x 812mm* pieces of Dynamat Xtreme
  • Dynamat Xtreme to be used on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound. Xtreme is also recommended for trunk lids, roofs, quarter panels and under hood installations.


Dynamat 10435 Xtreme Door Kit

!
  • Four 11.5"x 32" (4) 292mm x 812mm* pieces of Dynamat Xtreme
  • Four Doors Application

Dynamat 10455 Xtreme Bulk Pak

!
  • Contents:  (9) 18"x 32" (9) 457mm x 812mm* pieces of Dynamat Xtreme
  • Application: Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound. 
  • High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective, requires no heat to apply and is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Depending on your needs, choose Dynamat Xtreme in either application-specific kits (pre-cut material in appropriately-sized pieces) or in sheets you can cut to fit.

Dynamat 19405 XtremeTrunk Kit

!
  • Extreme Trunk Kit
  • 5 Sheets - 20 Sq. Ft. Total
  • Used on the trunk floor to maximize bass and to reduce road noise. Kit contains Dynamat Xtreme for trunk side panels and trunk lid.

Dynamat 10005 Hardwood Roller

!
  • One 1.125" (29mm) wide hardwood roller
  •  Economical tool for applying Dynamat and ensuring proper adhesion.

Dynamat 10007 Rubber Roller

!
  • One 2" wide solid rubber roller (1) 50mm wide solid rubber roller
  • Professional tool for applying Dynamat and ensuring proper adhesion with professional-looking results.



Dynamat 11103 Dynaliner

!
  • One 32" x 54" x 0.5"  (1) 813mm  x 1372mm x 13mm* piece of Dynaliner
  • Dynaliner provides high acoustical absorption and excellent thermal insulation for a variety of vehicle applications. Dynaliner converts sound to low-grade silent heat energy by creating optimum air flow resistance resulting in maximum sound absorption. Dynaliner acoustic foam has a combination of open and closed cell "windows" to accept and dissipate sound waves within the cells. Dynaliner comes in sheets, which you cut with a knife or scissors to fit specific vehicle surfaces. On vertical or overhead surfaces, apply Dynaliner over a spray adhesive. On floors, Dynaliner requires no adhesive.

Dynamat 11800 DYNAXORB

!
  • Kit Contains:
  • Two 6" x 6" Dynaxorb squares
  • Two 155mm x 155mm Dynaxorb squares
  • Dynaxorb eliminates back-wave speaker distortion that colors sound and confuses imaging by using a combination of energy absorbent material and the technology known as “faceting". Designed for installation behind speakers and in subwoofer enclosures.

Dynamat 11905 The Hoodliner

!
  • One 32" x 54" x 0.75"  (1) 813mm  x 1372mm x 19mm* piece of Hoodliner
  • The HOODLINER is a Polyether Urethane Based with a Reinforced Aluminized Facing and Pressure Sensitive Adhesive on application side, thermo-acoustic foam. This product is made to be applied inside the automotive engine compartment to the underside of the hood. Product shall be die cut to shape and placed onto the under hood surface. Adhesive side is smooth, giving complete contact with the underlying surface without any air pockets of channels. Both material and adhesive can withstand temperature ranges between -40C to +107C(-40F to +225F).

Dynamat 12025 Dynaspray Jug

!
  • One 2.64 Gallon Jug of Dynashield Spray

Appearance: Flat black, viscous liquid
Thickness: 0.050" average one coat thickness
Weight: .08 (lb./ft3)
Chemical Resistance: Water and Chemical resistance when cured
Handling and Application: Material must reach room temperature before handling
Fire Classification: Non-flammable, non-combustible
Temperature resistance range when cured: -30F to +250F

Hard-to-reach areas need Dynamat coverage? No problem.  Dynashield spray lets you reach fender wells, door skins, and other close areas.  Dynashield also makes an effective rock guard coating. Its non-toxic, non-flammable "high-build" formulation dries to a smooth paintable flat black barrier that stops noise while protecting your vehicle from gravel.

Dynamat 10025 Spray Gun

!
  • One Spray Gun with Hose
  • For quick professional results, use a Dynashield Spray Gun.  The Dynashield Spray Gun is the perfect tool for undercoating and applying Dynashield to hard-to-reach areas--giving you smooth paintable results.