JBL Car Amplifiers

Bookmark and Share

!

JBL GTO14001 GTO Mono Amplifier

!

The GTO14001 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize subwoofer tuning based on location and accompanying loudspeaker components. It also includes JBL's Dynamic Bass Optimization Circuit which provides variable filtering with adjustable Q below 100Hz. This circuit allows tuning of any enclosure to any vehicle. Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters. The GTO14001 also includes a remote bass level control allowing for on-the-fly bass output changes.

  • GTO Series Mono Amplifier
  • RMS power: 1 x 1200 Watts @ 4 ohm
  • RMS power: 1 x 1500 Watts @ 2 ohm
  • Frequency response: 20Hz - 330Hz (-3dB)
  • S/N: 108dBA @ 4 ohm
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Remote bass level control included
  • Dimensions (H x W x D): 18-9/16" x 10-3/8" x 2-1/8"

JBL GTO7001 GTO Mono Amplifier

!

The GTO7001 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize subwoofer tuning based on location and accompanying loudspeaker components. It also includes JBL's Dynamic Bass Optimization Circuit which provides variable filtering with adjustable Q below 100Hz. This circuit allows tuning of any enclosure to any vehicle. Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters.

  • GTO Series Mono Amplifier
  • RMS power: 1 x 425 Watts @ 4 ohm
  • RMS power: 1 x 700 Watts @ 2 ohm
  • Frequency response: 20Hz - 330Hz (-3dB)
  • S/N: 107dBA @ 4 ohm
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Remote bass level control Included
  • Dimensions (L x W x H): 15" x 10-3/8" x 2-1/8"

JBL GTO3501 GTO Mono Amplifier

!

The GTO3501 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize subwoofer tuning based on location and accompanying loudspeaker components. It also includes JBL's Dynamic Bass Optimization Circuit which provides variable filtering with adjustable Q below 100Hz. This circuit allows tuning of any enclosure to any vehicle. Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters. The GTO3501 also includes a remote bass level control allowing for on-the-fly bass output changes.

  • GTO Series Mono Amplifier
  • RMS power: 1 x 225 Watts @ 4 ohm
  • RMS power: 1 x 360 Watts @ 2 ohm
  • Frequency response: 20Hz - 330Hz
  • S/N: 104dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Optional remote bass level control
  • Dimensions (L x W x H): 12-1/4" x 10-3/8" x 2-1/8"

JBL GT5-A3001 GT5 Mono Amplifier

!

The GT5-A3001 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize subwoofer tuning based on location and accompanying loudspeaker components. It also includes JBL's Dynamic Bass Optimization Circuit which provides variable filtering with adjustable Q below 100Hz. This circuit allows tuning of any enclosure to any vehicle. Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters.

  • GT5 Series Mono Amplifier
  • RMS power: 1 x 175 Watts @ 4 ohm
  • RMS power: 1 x 225 Watts @ 2 ohm
  • Frequency response: 20Hz - 330Hz
  • S/N: 120dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Optional remote bass level control
  • Dimensions (L x W x H): 12" x 9-1/4" x 2-1/8"

JBL GTO752 GTO 2 Channel Amplifier

!

The GTO752 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize system tuning based on speaker location and accompanying loudspeaker components. Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters. The GTO752 is a great choice if you are looking to increase the output level of your current car audio system. To further improve your system's performance, we would suggest that that you also add a pair of JBL's GTO loudspeakers.

  • GTO Series 2 Channel Amplifier
  • RMS power: 2 x 75 Watts @ 4 ohm
  • RMS power: 2 x 110 Watts @ 2 ohm
  • Frequency response: 10Hz - 100KHz
  • S/N: 108dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Dimensions (L x W x H): 12-1/4" x 10-3/8" x 2-1/8"

JBL GT5-A402 GTO 2 Channel Amplifier

!

The GT5-A402 brings studio-quality audio to your car. With total peak power of 240 watts but dimensions of only 2-1/8" (54mm) high, 9-1/4" (235mm) wide and 7-1/2" (191mm) deep, the GT5-A402 is compact but mighty. Features include a cast-aluminum heatsink, built-in electronic crossover networks and bass boost. Full-range preamp outputs are provided, facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters.

  • GT5 Series 2 Channel Amplifier
  • RMS power: 2 x 40 Watts @ 4 ohm
  • RMS power: 2 x 60 Watts @ 2 ohm
  • Frequency response: 10Hz - 100KHz
  • S/N: 108dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Dimensions (L x W x H): 7-1/2" x 9-1/4" x 2-1/8"

JBL GTO1004 GTO 4 Channel Amplifier

!

The GTO1004 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize system tuning based on speaker location and accompanying loudspeaker components. Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters. The GTO1004 is a great choice if you are looking to increase the output level of your current car audio system. To further improve your system's performance, we would suggest that that you also add a pair of JBL's GTO loudspeakers.

  • GTO Series 4 Channel Amplifier
  • RMS power: 4 x 100 Watts @ 4 ohm
  • RMS power: 4 x 150 Watts @ 2 ohm
  • Frequency response: 10Hz - 100KHz
  • S/N: 105dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Dimensions (L x W x H): 18-9/16" x 10-3/8" x 2-1/8"

JBL GTO504 GTO 4 Channel Amplifier

!

The GTO504 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize system tuning based on speaker location and accompanying loudspeaker components. Full range preamp outputs are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters. The GTO504 is a great choice if you are looking to increase the output level of your current car audio system. To further improve your system's performance, we would suggest that that you also add a pair of JBL's GTO loudspeakers.

  • GTO Series 4 Channel Amplifier
  • RMS power: 4 x 55 Watts @ 4 ohm
  • RMS power: 4 x 70 Watts @ 2 ohm
  • Frequency response: 10Hz - 100KHz
  • S/N: 105dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Dimensions (L x W x H): 13-13/16" x 10-3/8" x 2-1/8"

JBL GT5-A604 GTO 4 Channel Amplifier

!

The GT5-A604 brings studio-quality audio to your car. With total peak power of 640 watts but dimensions of only 2-1/8" (54mm) high, 9-1/4" (235mm) wide and 12" (305mm) deep, the GT5-A604 is compact but mighty. Features include a cast-aluminum heatsink, built-in electronic crossover networks, auxiliary line-level outputs and bass boost. Full-range preamp outputs are provided, facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters.

  • GT5 Series 4 Channel Amplifier
  • RMS power: 4 x 60 Watts @ 4 ohm
  • RMS power: 4 x 80 Watts @ 2 ohm
  • Frequency response: 10Hz - 100KHz
  • S/N: 105dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Dimensions (L x W x H): 12" x 9-1/4" x 2-1/8"

JBL GTO5355 GTO 6 Channel Amplifier

!

The GTO5355 has been engineered to ensure optimum power delivery into numerous impedances with low distortion. It comes outfitted with a variable 12dB per octave electronic crossover allowing you to optimize system tuning based on speaker location and accompanying loudspeaker components. The GTO5355 is designed to drive a complete system using its four full range channels and powerful single subwoofer channel. To further improve your system's performance, we would suggest that that you also add a pair of JBL's GTO loudspeakers and subwoofers.

  • GTO Series 6 Channel Amplifier
  • RMS power: 4 x 55 + 1 x 225 Watts @ 4 ohm
  • RMS power: 4 x 75 + 1 x 360 Watts @ 2 ohm
  • Frequency response (Channels 1, 2, 3, 4): 10Hz - 100KHz
  • Frequency response (Channels 5, 6): 20Hz - 250Hz
  • S/N: 104dBA (-3dB)
  • Electronic crossover: 12dB/Oct.
  • Variable Bass boost 50Hz up to 12dB
  • RCA low level input
  • Auxiliary Full-Range RCA output
  • Optional remote bass level control
  • Dimensions (L x W x H): 18-9/16" x 10-3/8" x 2-1/8"