• One 32" x 54" x 0.25"  (1) 813mm  x 1372mm x 6mm* piece of Dynaliner

Appearance: Pink, semi-closed cell foam
Thickness: 0.25"
Weight: 1.75 lbs per 12 square feet
Hardness: 28
Density: 7.0 (lb./ft3)
Tensile Strength: 56 psi
Elongation: 120%
Tear Strength: 1.6 lbs
Compression Set: 26%
Rebound: 11%
Thermal Conductivity: 0.23
Water Absorption: 0.11 lb/ft3
Federal Standards Tests:
FAR 25.855 (a-1) meets
FAR 25.853 (b) meets (b-3) meets
UL 94.HBF meets
FMVSS-302 meets

TacMat takes a scientific approach to conquer two enemies that destroy your driving pleasure: noise and heat. The same technology used in aerospace materials gives TacMat a higher insulating value than fiberglass and sound-reducing capability greater than other materials ten times its weight. A thermo-acoustic cockpit liner, TacMat is approved by DOT FMVSS 302 and passes Federal Aviation Regulations. TacMat uses a unique conversion process that limits the volume and duration of any structure-borne noise within your vehicle's interior.

• One 32" x 54" x 0.5"  (1) 813mm  x 1372mm x 13mm* piece of Dynaliner

• Dynaliner provides high acoustical absorption and excellent thermal insulation for a variety of vehicle applications. Dynaliner converts sound to low-grade silent heat energy by creating optimum air flow resistance resulting in maximum sound absorption. Dynaliner acoustic foam has a combination of open and closed cell "windows" to accept and dissipate sound waves within the cells. Dynaliner comes in sheets, which you cut with a knife or scissors to fit specific vehicle surfaces. On vertical or overhead surfaces, apply Dynaliner over a spray adhesive. On floors, Dynaliner requires no adhesive.

• One 24" x 36" x 0.5"  (1) 609mm  x 914mm x 13mm* piece of Extremeliner

• Extremeliner is the ultimate low-frequency attenuator.  Extremeliner is a four-part composite barrier consisting of 1/8 inch layer of neoprene, 15 mils of acoustic lead barrier, 1/4 inch layer of high efficiency acoustic foam and a 3 mil urethane top facing.  Extremeliner works anywhere on your vehicle's floor and firewall for the ultimate barrier against road and engine noise. 

Appearance: 4-Layer Acoustical foam barrier with black urethane surface
Thickness: 0.392 inches
Mass: 1.5 lb./ft2
Temperature Resistance Range: -54C to +149C (-65F to +300F)
Chemical Resistance: Resistant to water and mineral oils
Adhesive Peel Strength: 74.81 N/min on cold steel
Fire Classification: Meets FMVSS 302
Handling And Application: The material must be at room temperature before handling and application
Storage Information: Temperature Range: 32F to 86F
Number of Sheets in Stack:200 Maximum
This material must be stored horizontally in its wrapping

• One 32" x 54" x 0.75"  (1) 813mm  x 1372mm x 19mm* piece of Hoodliner

• The HOODLINER is a Polyether Urethane Based with a Reinforced Aluminized Facing and Pressure Sensitive Adhesive on application side, thermo-acoustic foam. This product is made to be applied inside the automotive engine compartment to the underside of the hood. Product shall be die cut to shape and placed onto the under hood surface. Adhesive side is smooth, giving complete contact with the underlying surface without any air pockets of channels. Both material and adhesive can withstand temperature ranges between -40C to +107C(-40F to +225F).

• Kit Contains:
• Two 6" x 6" Dynaxorb squares
• Two 155mm x 155mm Dynaxorb squares
• Dynaxorb eliminates back-wave speaker distortion that colors sound and confuses imaging by using a combination of energy absorbent material and the technology known as “faceting". Designed for installation behind speakers and in subwoofer enclosures.
  

• One 2" wide solid rubber roller (1) 50mm wide solid rubber roller

• Professional tool for applying Dynamat and ensuring proper adhesion with professional-looking results.
  

  
  
  

• One 1.125" wide hardwood roller (1) 29mm wide hardwood roller

• Economical tool for applying Dynamat and ensuring proper adhesion.